Skip to main content

[REVIEW] Level51 / Aftershock Vapor 15 Pro (i7-9750H, GTX 1660Ti)


[With in depth thermal testing and thermal results with CM Mastergel Maker Nano thermal paste]

An Intel collaboration.

Welcome to my review on Level51 / Aftershock Vapor 15 Pro thin and light gaming laptop, also known as Tongfang QC7 (LAPQC71A). Main specs of the review unit are as below:

i7-9750H
GTX1660Ti
16gb dual channel RAM
512GB NVMe SSD
15.6 inch 144Hz IPS
Intel AX200
W10 (unactivated)

Note: This review is originally a video based review, therefore there will be only a few images.

Design
Starting off with the design of the laptop. The matte black colour makes the laptop look professional IMO. The design is clean. There are no disturbing or fancy lines, which makes it suitable for professional/business environments (remember to off RGB lights). One word to summarize the design –minimalistic. What do you think?

Build quality
The laptop chassis is mainly made from magnesium alloy. The lid has only minimal flex when twisted. The same can be said when force is applied on the middle of the lid cover. There is only minimal screen wobbling and the lid can be opened with one hand. The maximum lid opening angle is around 130 degrees. The bottom chassis, including the keyboard deck and C cover, doesn’t flex when force is applied on it. It cannot be twisted also. Overall, build quality is superb.

Input devices
The mechanical keyboard (GTMX Brown switch) has deep travel (over 2mm) and low actuation force (around 45-50g). Overall typing feel is good; however, it might take some time to get use to the keyboard since the mechanical keys feel quite unique. Key noise is a bit loud if you press hard on the keys. Since there is no numpad, the keyboard layout Is aligned to the middle. You can customize keyboard lighting via Control Panel. The Precision glass clickpad is quite large. Surface is smooth as expected and accuracy is decent, although not Macbook level yet. The L/R clicks feel decent too in terms of actuation force and click sound. You can disable the touchpad by double tapping the top left corner. The clickpad is aligned to the middle.


Display, speakers
The 15.6 inch 144Hz IPS display from BOE (BOE084D) has good colours, brightness and contrast. Ghosting is minimal as shown here. This panel doesn’t have PWM.

*shot at 1/60s

The 2 down firing speakers (facing down instead of sideways, therefore sound is covered) have OK audio, even after tuning with SoundBlaster software. There is some distortion even at 75% volume, let alone 100%.


Here is the Soundblaster setting I use:



Here is the Latencymon result:


Thermals
Now on to thermal testing. The bottom cover has plenty of intakes. Inside the laptop, the cooling solution has 2 shared heatpipes (one doesn’t connect to GPU fan) and 1 separate heatpipe for both CPU (stretched to GPU VRMs) and GPU. There are 4 exhaust vents.




Notes for thermal testing:
Ambient temp: 24-26C
CPU PROCHOT: 90C, GPU throttling temp: 75C
Nvidia driver 441.41
Intel iGPU driver 26.20.100.7463
W10 1909 18363.535
Control Center 2.1.0.19, BIOS 0058, EC 1.20
There is CPU undervolt of -50mV by default. Custom undervolt is -100mV (highlighted in blue colour)
Laptop is plugged in
Max fan noise is around 56-58dBA (Benchmark mode)

CPU power limits (PL1, PL2):
Performance mode: 65W, 100W
Balanced mode: 45W, 65W
Quiet mode: 35W, 60W

CPU - Aida64 FPU only: 60sec refresh interval (in Aida64)
Performance 65W
Max 98W at start, then slowly drop to ~71W before hitting PL1
Stock: 84-87C, 3.15-3.17GHz
UV-100mV: 85-86C, 3.3-3.34GHz
Max fan speed all the time

Balanced 45W
~60W before hitting PL1 (47-48dBA)
Stock: 70-73C, 2.6-2.7GHz
UV: 70-72C, 2.7-2.8GHz
40-41dBA

Quiet 35W
Stock: 64-65C, 2.2-2.3GHz
UV: 64-66C, 2.3-2.4GHz – ~40W before PL1, 67-68C, ~2.6GHz
36-37dBA

GPU - Unigine Heaven: With CPU UV, CPU disabled turbo, Extreme profile, windowed mode
Performance: max 1875MHz
48-49dBA: Max 75C, ~1700MHz
Benchmark mode (GPU Boost+max fan): Max 75C, ~1755MHz
Benchmark mode, with custom GPU curve and 87C GPU temp cap: Max 80C, 1935MHz@0.962V

Balanced: max 1815MHz
44-45dBA (most of the time), 41-42dBA (sometimes): Max 75C, ~1695MHz

Quiet mode: Not usable for dGPU due to very low clock speed

CPU+GPU - Aida64+Heaven, Performance mode, benchmark mode enabled
75C GPU cap:
CPU: Max 90C, 2.94-2.98GHz, 47-50W
GPU: Max 75C, ~1500MHz (min 1455MHz)

75C GPU cap, CPU UV:
CPU: Max 90C, 3.08-3.12GHz, 47-50W
GPU: Max 75C, ~1505MHz (min 1455MHz)

87C GPU cap, custom GPU curve, CPU UV:
CPU: Max 90C, 43-47W, 2.95-3.05GHz
GPU: Max 80C, 1740MHz@0.831V (personally I don’t want to push further than 80C)

Apex Legends – 1080p highest settings. 4GB VRAM budget, 70% in game brightness, Windows disabled game bar, disabled game mode
Performance, benchmark mode enabled (will max out fan on auto, even if disabled):
CPU UV: 75-82C, 4GHz, 26-28W; sometimes spike to 90C, 40W
GPU: Max 75C, 1590-1725MHz

Scene 1: ~100FPS; Scene 2: ~170FPS


Balanced:
CPU UV: 73-80C, 22-27W, 4GHz; sometimes clock speed will dip, sometimes temp spike
GPU: Max 75C, 1515-1605MHz

3DMark Time Spy: CPU undervolted, Performance mode, benchmark mode enabled 
Stock 75C GPU cap:

82C GPU cap (for longevity reasons), 1740MHz@0.831V:

Best result, from demo unit (1935MHz): 6266 score, 6439 graphics

Note: Benchmarks are done with one run only

3DMark Fire Strike: CPU undervolted, Performance mode, benchmark mode enabled
Stock 75C GPU cap:
82C GPU cap (for longevity reasons), 1740MHz@0.831V:

Best result, from demo unit (1935MHz): 14315 score, 16302 graphics

Note: Benchmarks are done with one run only

Bonus Section: Repasted with CM Mastergel Maker Nano
CPU - Aida64 FPU only: 60sec refresh interval (in Aida64)
Performance 65W: Hold at 100W at start for a few seconds (start at 80+C), then slowly drop to 78-80W before hitting PL1, max fan.
Stock: 79-82C, 3.16-3.2GHz
UV-100mV: 80-82C, 3.3-3.34GHz
52-53dBA

Balanced 45W
Stock: 69-71C, 2.6-2.7GHz
UV: 70-71C, 2.72-2.8GHz
36-40dBA

Quiet 35W
Stock: 64-65C, 2.2-2.3GHz
UV: 63-64C, 2.32-2.4GHz
~34dBA

GPU - Unigine Heaven: With CPU UV, CPU disabled turbo, Extreme profile, windowed mode
Performance: max 1860MHz
48-49dBA: Max 75C, ~1710MHz
Benchmark mode (GPU Boost+max fan): Max 75C, ~1780MHz
Benchmark mode, with custom GPU curve and 87C GPU temp cap: Average 76C, max 78-79C; 1935MHz@0.969V

Balanced:
41-43dBA: Max 75C, ~1665MHz

CPU+GPU - Aida64+Heaven, Performance mode, benchmark mode enabled
75C GPU cap:
CPU: Max 90C, 3.14-3.19GHz, 54-58W
GPU: Max 77C, 1455MHz

75C GPU cap, CPU UV:
CPU: Max 90C, 3.26-3.32GHz, 54-57W
GPU: Max 77C, 1455MHz

87C GPU cap, custom GPU curve, CPU UV, CPU capped to 45W:
CPU: 86-88C, 45W, 2.97-3.00GHz
GPU: Average 80C, max 81C; 1740MHz@0.831V

Apex Legends – 1080p highest settings. 4GB VRAM budget, 70% in game brightness, Windows disabled game bar, disabled game mode, CPU capped to 45W
Performance, benchmark mode enabled (will max out fan on auto, even if disabled):
CPU UV: 74-77C, 4GHz, 26-28W; sometimes temp spike to mid 80s
GPU: Max 75C, 1620-1680MHz

Scene 1: ~110FPS, scene 2: ~185FPS

3DMark Time Spy: CPU undervolted, Performance mode, benchmark mode enabled
Stock 75C GPU cap:
82C GPU cap (for longevity reasons), 1965MHz@0.962V (drop to 1935):

Note: Benchmarks are done with one run only

3DMark Fire Strike: CPU undervolted, Performance mode, benchmark mode enabled
Stock 75C GPU cap:
82C GPU cap (for longevity reasons), 1965MHz@0.962V (drop to 1935):

Note: Benchmarks are done with one run only
  • To increase GPU performance, CPU needs to be power capped. If CPU is exceeding 45W under CPU+GPU load, cap it to something lower like 45W or 35W via software like Throttlestop
  • You can override 75C GPU temp cap with Asus GPU Tweak II. To apply both 87C GPU temp cap and custom GPU curve (aka GPU undervolt), apply 87C temp cap first in Asus GPU Tweak II, then only apply the curve in MSI Afterburner
  • Repaste doesn’t seem to help much when both CPU and GPU are stressed at the same time, probably due to heatsink limitation
  • Under CPU+GPU load, the middle of the keyboard and the area surrounding the keyboard will become warm, especially top of the keyboard which can be hot to touch. Keyboard deck also feels a bit warm, especially on the right side
  • There is uneven CPU core temp: max 12C, even with repaste it doesn’t seem to help much
  • Lifting the laptop doesn’t seem to help much
  • The included power adapter is a 230W unit from FSP, which is quite large. Take note that temps will be a little higher when running dual channel memory



Battery life
This laptop has a 93.48Wh battery. Battery life of this laptop is excellent. According to my testing, you can expect around 8.85-9.05 hrs of battery life while watching Youtube. In light mixed usage, around 8 hrs 20 mins is possible.

Test settings for Youtube video: Microsoft Edge, 1080p YT fullscreen, Quiet mode, volume 24%, brightness 15%, CPU UV -100mV, force iGPU in Nvidia Control Panel, CPU C states normal

Miscellaneous
This laptop weights at ~1.87kg and has ~20mm thickness. The size is compact for a 15 inch, comparable with Razer Blade 15.

Ports:



Other settings in Control Center:



  • The paint material doesn't attract much fingerprints (little more susceptible on lid)
  • The bottom cover can be easily opened after taking off all screws
  • It has IR camera for Windows Hello
  • The default keyboard backlight is white colour (before entering Windows), however the white colour is somewhat blueish
Issues found during testing:
  • There are no indicator lights for power and charging outside - only at C cover which is unable to see if lid is closed
  • Sometimes dGPU couldn't turn off even while idling, requires restart
  • Apex Legends in game audio broken after changing Sound Blaster headphone/speaker profile settings
  • Opening CSGO and Unigine Heaven will reset display colour calibration, requires turning off and on – probably Spyder5Pro related issue though
  • Lid closing is too fast at the last 15-20 degrees, could be more elegant (slower)
  • Fan will stay on even in BIOS, or when CPU is over 50C
  • Thunderbolt issue: Level51 is aware of this issue and made some adjustments to the laptop, please refer to BIOS settings
  • Removal of heatsink requires fan disassembly too since the whole heatsink set includes the fans, which adds extra work
Conclusion
Thin and light gaming laptops with long battery life are usually expensive. If you want this kind of laptop, Vapor 15 Pro will be the cheapest option. Does it mean that it’s cheaply made? Not at all. It has excellent exterior build and surprisingly good thermals for a thin and light. Even with a Thunderbolt 3 port. For RM5999, there’s basically no competition in thin and light+long battery life+powerful GPU category.

The design language looks professional (with RGB lights off), the glass touchpad is nice to have. However, the keyboard needs some time to get used to due to unique typing feel and aligned to middle layout due to lack of numpad. Performance is also limited due to low temperature cap in both CPU and GPU. Of course, you can further tune the laptop for best performance; however, I bet 99% buyers won’t do that. It will still play games at high frames though. Keep in mind that the fans are quite loud while under load. The speakers are OK at best.

Check out Level51 website for more details and customization.

Pros:
Good thermals
Excellent build quality
Long battery life
Thin and light with a compact size
Subtle yet premium look
Decent input devices
IR camera for Windows Hello
Good quality 144Hz IPS panel
Thunderbolt 3

Cons:
GPU is temperature capped (75C), CPU has fairly low temp cap as well (90C) – hurts performance without tuning
Auto fans are loud
Audio quality is a bit underwhelming
Keyboard requires some time to get used to

Thanks for reading!


Tongfang QC7 (LAPQC71A) aka Eluktronics Mag-15, XMG Fusion 15, Maingear Element, Level51 / Aftershock Vapor 15 Pro

Comments

  1. between the Illegear Onyx Pro and this, which would you recommend?

    ReplyDelete
  2. both have their own pros and cons, depending on your needs (if you need further explanation, PM via LTT/LYN forums

    ReplyDelete
  3. Eagerly waiting your review for Selenite Pro!

    ReplyDelete

Post a Comment

Popular posts from this blog

[GUIDE] How to undervolt laptop (Intel CPU and Nvidia GPU, 2021 revised version)

This is my own guide on how to undervolt Intel CPU / Nvidia GPU in your laptops. Hope you found it useful! Notes: This is my own method on how to do it. There are a lot of ways to undervolt CPU+GPU, but this is how I usually undervolt with all the laptops I had reviewed and with my own laptop I will try my best to make the explanation clear and will be using the undervolt profiles in my laptop as example As mentioned in the title, this guide is for those with Intel CPU (4th gen or later) or Nvidia GPU (10 series or later) or both only. Some laptops have BIOS version with Plundervolt patch that locks CPU voltage control, so take note You might brick your 10th/11th gen Intel laptop if you undervolted too much even with software like Throttlestop, I will not be responsible if something catastrophic happens To TGL-45 laptop owners: Only i7 and i9 has unlocked CPU voltage control, even so the laptop model itself might not allow you to undervolt the CPU. Check your laptop model first

[REVIEW] Level51 Forge 15X 2021 (i7-10870H, RTX 3060)

RTX 3060 Laptop GPU, any good? Welcome to my review on Level51 Forge 15X 2021 gaming laptop, also known as Clevo NH58DPQ. Main specs of the review unit are as below: i7-10870H (8 core) RTX3060M, max 105W 16GB 2933MHz dual channel RAM Klevv Cras C710 256GB NVMe SSD 15.6 inch 144Hz IPS Intel AX201 W10 (unactivated) Since this is basically the same laptop with Forge 15 Pro (2019), you can find out more details about the chassis itself here:  [REVIEW] Level51 Forge 15 Pro Laptop (i7-9750H, RTX 2060) - Member Reviews - Linus Tech Tips Build quality The laptop chassis is mainly made from ABS plastic. The lid is made from metal alloy - rigidity is OK when twisted. The sam e can be said when force  is applied on the middle of the lid cover. There is only minimal screen wobbling and the lid can be opened with one hand. The hinge is smooth and well calibrated. The bottom chassis, including  the keyboard deck and C cover, has only minimal flex when force is applied on it or twisted. Overall, buil

[REVIEW] Lenovo Legion 5i 15ITH6H - Intel i7-11800H, Nvidia RTX 3060

The fastest RTX 3060 laptop? Welcome to my review on Lenovo Legion 5i 15 gaming laptop (2021 version, 15ITH6H). I bought this laptop myself with a special price thanks to a laptop seller I knew for about $1200. Main specs of my laptop are as below (model 82JH002MMJ ): i7-11800H RTX3060 Laptop 130W Kingston Fury Impact 16GB 3200MHz RAM (CL20 1Rx8, upgraded from stock RAM) Samsung PM9A1 1TB PCIe 4.0 SSD 15.6 inch 165Hz FHD IPS GSYNC Intel AX201 W10 SL with MS Office H&S 2019 2yr Legion Ultimate Support In this review I will also compare a few things with my old laptop, Legion Y530. Lenovo Legion 5i 15 website:  Legion 5i Gen 6 (15" Intel) | Intel®-powered gaming laptop with NVIDIA® graphics | Lenovo Malaysia   Build quality The laptop chassis is mainly made from ABS plastic. Despite that, build quality is surprisingly good. The bottom chassis (keyboard deck/C cover) has little to no flex when force is applied on it. The same can be said when force is applied on the middle of t